 | For Datasheets, Manuals and Downloads Click on the Pre-sales info section to your right |
|
For use as a low-cost data concentrator or local display, the 9510 RTU(ADR9000) is a multi-function device which supports multiple protocols, digital and I/O options, and customizable displays. Each unit must be custom configured for your application. Standard units are shipped with display only for the digital I/O status. To use the unit as a Local Display custom programming is required.
Features
Monitor breaker status changes with 1ms resolution
Collect, log, and scale pulse inputs from water, air, gas, electricity or steam meters
Act as an Ethernet Gateway for serial devices
Display Modbus slave information and make available as a web page
Log and e-mail down stream Modbus devices
Display trip unit data from WL, Static Trip III, and SB-EC devices
Trigger alarms based on setpoint conditions
Data Logging
Standard memory capacity 5MB and Optional memory capacity 10MB
Log up to 50/800 parameters based on events or schedules
Coincident Min/max logging
Time synchronization via GPS
Communications
Ethernet 10Base-T or 10Base-FL
Two RS485 ports
Modbus RTU
WebMeter, on board web server
MeterM@il, logged data and alarms via e-mail
Digital Inputs and Outputs
Up to 16 digital inputs available
Count pulses for total utilities management, including gas and steam
Analog Inputs/Outputs
Pulse outputs for external energy tracking or control