Compact Power and Energy Meter
 | Datasheet & Manual / (9350 Power Meter) Downloads Click on the Pre-sales info section to your right. |
|
|
|
|
|
|
|
|
|
|
The 9350 Advanced Power Meter with web server technology packs power quality in a convenient cost effective package. With pre-configured sag/swell, harmonics and waveform recording, the 9350 comes ready for use from the initial start-up. Take advantage of the pre-configured sag/swell modules, data recorders and harmonic tools to find out immediately what your facility's electrical profile looks like. The 9350 advanced power meter can be ordered with switchboard hardware or as a retrofit kit designed to fit in existing GE S1 or ABB FT21 switchboard cases, making meter replacement that much easier. Use the set-point control functionality to alarm on over/under voltage conditions, peak demand, or over current. And have the meter send these messages via e-mail. Use the internal web pages to access real-time data over the Internet or incorporate the meter in a complete power monitoring system to help you save money, monitor equipment, and to aid in the planning of additional capacity.
9350 Power Meter Features:
Measurements
Voltages, currents, frequency
Demand, kilowatt or amp
Time-of-use
Energy: Bi-directional, absolute and net
Harmonics to the 31st
Exceeds class .5 revenue accuracy
Transformer or line loss compensation
Disturbance Analysis
Standard memory capacity 5MB and Optional memory capacity 10MB
Log up to 50/800 parameters based on events or schedules
Coincident Min/max logging
Time synchronization via GPS
Communications
Ethernet 10Base-T or 10Base-FL
Two RS485 ports
Front panel optical port
Modbus RTU and DNP3.0 through serial
WebMeter, on board web server
MeterM@il, logged data and alarms via e-mail
Logging & Recording
Scheduled or event-driven Log up to 96 parameters
Coincident Min/max logging
Time stamps, 0.001 seconds resolution.
Standard memory capacity 300 KB
Waveforms logs, Maximum # of consecutive cysles per event is 48
Setpoints, Alarming, and Control
Setpoint on any parameter or condition
1 second operation
Math, Logic, trig, log, linearization formulas.
Digital Inputs and Outputs
Up to 4 digital inputs available
Count pulses for total utilities management, including gas and steam
Analog Inputs/Outputs 0-20mA, 0-1mA
Pulse outputs for external energy tracking or control