General Applications

• How to Create Off-Delay Timers, Pulse Timers, and Extended Pulse Timers (Tip 31)
• How to Dim a Light Bulb with the Integrated DC Pulse Outputs of the S7-200 (Tip 21)
• How to Emulate an External Potentiometer (Tip 43)
• How to Track How Long a Device Has Been Operating (Tip 16)
• Timing for Staircase Lighting (Tip 17)
• Step Sequence (Event Drum Timer) (Tip 18)
• Time/Event Drum Example 1 (Tip 63)

Integrated Functions

• Analog Potentiometer of the S7-200 (Tip 03)
• Edge Detection of Input Signals (Tip 09)
• Handling I/O Interrupts (Tip 02)
• Handling Timed Interrupts (Tip 01)
• How to Read and Write to the Real-Time Clock of the S7-200 (Tip 08)
• How to Use Fill Memory, FOR/NEXT, and Reset to Fill and Clear Memory Areas (Tip 06)
• How to Use High Speed Counters of the S7-200 (Tip 04)
• Handling Pulse Width Modulation with the S7-200 (Tip 07)

Communications

• Freeport Mode: Simple Applications to Illustrate Its Use (Tip 05)
• How to Use a Modem to Support STEP 7 -Micro/WIN (Tip 49)
• How to Access a PPI Multiple Master Network by Means of a Modem (Tip 61)
• Connecting a Parallel Printer to an S7-200 in Freeport Mode (Tip 19)
• General Notes about PROFIBUS and EM 277 (Tip 56)
• How to Connect an RS 485 Encoder to the S7-200 PPI Interface (Tip 37)
• How to Connect an S7-300 (Master) to an S7-200 (Slave) by Means of PROFIBUS (Tip 57)
• How to Integrate AS-Interface I/O Data into the S7-200 (Tip 55)
• How to Use a Hayes Modem with an S7-200 in Freeport Mode (Tip 26)
• How to Use Freeport Mode to Connect Several S7-200 CPUs in a Remote I/O Network (Tip 27)
• How to Use Freeport Mode to Receive Information from a Bar Code Reader (Tip 20)
• How to Use the TD 200 Operator Interface with an S7-200 CPU (Tip 51)
• Connection between S7-200 and PC: How to Read from a Windows Application (Tip 35)
• How to Connect to the Ethernet (Tip 60)
• How to Use the XMT and RCV Instructions to Communicate with an Operator Interface (Tip 52)
• Modbus RTU Slave for S7-200 CPU (Tip 41)
• S7-200 PPI Network Notes (Tip 42)
• How to Connect an S7-200 (Head Station) to multiple S7-200 (Substation) by Means of Analog or GSM Modems (Tip 64)

Motor Control

• Reversible Motor Starter Circuits for Changing the Rotational Direction of Three-Phase AC Induction Motors (Tip 10)
• Reversible Motor Starter for Pole-Changeable Three-Phase Inductions Motors with Rotational Direction Selection (Tip 11)
• Star-Delta Motor Starter with Starter Acknowledgement (Tip 13)
• Star-Delta Starter without Acknowledgement (Tip 12)
• Stator-Resistance Starting Circuit (Tip 15)
• Wound Rotor (Tip 14)
• Freeport Communication Interface to MICROMASTER Drives (Tip 28)

Positioning

• Closed-Loop Control Positioning with Position Monitoring and Position Correction (Tip 30)
• How to Use a PTO Ramp with the S7-200 CPU (Tip 50)
• How to Use Integrated Pulse Outputs for Open-Loop Control Positioning with a Stepper Motor (Tip 23)
• Trigger a Stepper Motor Drive Using Integrated DC Pulse Outputs (Tip 22)
• Position control with MICROMASTER420 frequency converter and asynchronous motors with USS protocol (Tip 65)

Regulatory Control

• How to Scale Analog Values (Tip 38)
• How to Use a High-Speed Counter Input to Record Analog Values by Means of an Analog-to-Frequency Converter (Tip 29)
• How to Handle Analog Input Filtering for 21x CPUs (Tip 34)
• Temperature Measurement Using Digital Inputs (Tip 45)
• How to Measure and Monitor Temperature with a Pt100 Resistance Temperature Detector (Tip 36)
• How to Use EM231 Resistance Temperature Detector Module with an S7-200 CPU (Tip 47)
• How to Use EM 231 Thermocouple Module with an S7-200 CPU (Tip 46)
• How to Use the PID Instruction Wizard (Tip 53)
• How to Use the PID Loop Instruction (Tip 54)

As the #1 supplier of Micro Automation, we continue to be driven by your success. If there is anything more we can do for you, please click here and we will get back to you as quickly as possible.